Features
■ Compact Design
Easy Set-up Light weight, low profile design needs only 10" to 12"of clearance and set up time is 30 minutes or less.
Once the adjustable drive chain is pinned together and tensioned around the pipe the machine is ready to operate.
■ Standard Weld Prep Capability
Weld preparation detail can be achieved from common 30° and 37-1/2°bevel on standard wall carbon steel.
■ Pipeline Maintenance
Bohyar’s Travel Cutter offers the inherent advantages of a completely sealed and self-lubricating closed loop system. It is particularly suited to field machining operations under the type of hostile conditions often found in pipe line maintenance and construction such as dirt, sand and water.
Technical Parameters
| Model | TC0672 | Processing Range | 6"-72"(153mm-1829mm) |
| Drive | Hydraulic | Wall Thickness | 5mm-25mm |
| Hydraulic Requirements | 15 gpm @ 1500 psi.
(57LPM,106bar) | Clearance | 254-305 mm (10"-12") radial, depending on pipe diameter. 20"axial(508 mm) |
| Feed Method | Positive, non-slip chain drive. | Finish | Paint |
| Cutter Speed | Adjustable 0-60RPM | Installation | Vertical or horizontal installation |
| Operating Dimension | 610x510x280(mm) | Operating Weight | 100kg |
| Hydraulic Control | Cutter on-off, feed on-off. Flow control valves which can adjust feed speed. Separate controls, providing adjustable feed and cutter speed. Forward/Reverse travel permits machine to be backed up. |
Tools
■ We have standard beveling tools of 30°, 37° and also can customize the tools.
Safety Instructions
■ Provide adequate lighting to use the equipment, in accordance with worksite or local regulations.
■ Keep work area clear. Keep all clutter and nonessential materials out of the work area. Only people directly involved with the work being performed should have access to the area.
■ Make sure the equipment is stable when attached to the work piece for the operation. Ensuring stability of the installed tool is the responsibility of the operator.
Working On Site:
